BMW X5: Driver assistance systems
BMW X5 (G05) 2019-2026 Owners Manual / Controls / Driver assistance systems
- Manual Speed Limiter
- Cruise control
- Active Cruise Control with Stop&Go function ACC
- Turning on/off and interrupting cruise control - Active Cruise Control with Stop&Go function ACC
- Setting the speed - Active Cruise Control with Stop&Go function ACC
- Displays in the instrument cluster - Active Cruise Control with Stop&Go function ACC
- System limits - Active Cruise Control with Stop&Go function ACC
- Speed Limit Assistant
- Steering Assistant
- Extended Traffic Jam Assistant
- Depending on the equipment version: Automatic Lane Change Assistant
- Depending on the equipment version: lane change with active guidance
- PDC Park Distance Control
- Depending on equipment version: emergency brake function, Active PDC
- With Parking Assistant: side parking aid
- Without Surround View: rearview camera
- With Parking Assistant: Parking Assistant
- Display on the Control Display - With Parking Assistant: Parking Assistant
- Depending on the equipment version: driving out of a parking space using the parking assistant
- With Parking Assistant: Reversing Assistant
- With Parking Assistant Plus: Surround View
- Display on the Control Display - With Parking Assistant Plus: Surround View
- With Parking Assistant Plus: Panorama View
- With Parking Assistant Plus: Remote 3D View
- Cross traffic warning
READ NEXT:
Manual Speed Limiter
Principle
The system can be used to set a speed limit, for
instance to prevent the vehicle from exceeding
speed limits.
General information
The system can limit the speed, starting at a
value of 20 mp
Cruise control
Principle
With the Cruise Control, a set speed can be adjusted
using the buttons on the steering wheel.
The system maintains the set speed. The system
accelerates and brakes automatically as
needed.
Active Cruise Control with
Stop&Go function ACC
Principle
Using the Cruise Control, a desired speed and a
distance to a vehicle ahead can be adjusted using
the buttons on the steering wheel.
General information
The system maintains the set speed on
SEE MORE:
Initial Operation With Test Run Of Dynamic Drive
NOTE: The Service function Initial operation of Dynamic Drive must be
carried out
after:
Work on the Dynamic Drive system which involved opening hydraulic
lines
Replacement / Programming / Coding Dynamic Drive control unit
Replacement lateral acceleration sensor
Parameters and zero point of
Spring With Suspension
REPLACING FRONT LEFT OR RIGHT SPRING STRUT SUPPORT BEARING
Special tools required:
31 3 341
31 3 351
31 3 353
WARNING: Observe the following instructions to avoid any risk of injury
by the coil
springs.
Prior to each use, check the special tools for defects,
modifications
and operational
© 2019-2026 Copyright www.bmwx5info.com
