BMW X5: iDrive
BMW X5 (G05) 2019-2026 Owners Manual / Controls / iDrive
- Operating concept
- Control Display and Controller
- Operating via the Controller
- Operation via touchpad
- Operation via touchscreen
- Principle - BMW Intelligent Personal Assistant
- Activating the voice control system - BMW Intelligent Personal Assistant
- Possible commands - BMW Intelligent Personal Assistant
- Settings - BMW Intelligent Personal Assistant
- Experience Modes - BMW Intelligent Personal Assistant
- BMW Gesture Control
READ NEXT:
Operating concept
Principle
iDrive is the operating concept of the infotainment
system and includes a large number of
functions.
General information
These functions can be operated as follows:
Via the Controller.
Vi
Control Display and
Controller
Principle
The iDrive functions are displayed on the Control
Display. The Control Display can be operated using
the Controller, touchpad, and touchscreen.
Overview
Control Display with touchscreen
Operating via the
Controller
Opening the main menu
Press the button.
The main menu is displayed.
Selecting a menu
Selecting menu items
1. Turn the Controller until the desired menu
item is highlighted.
2. Press the Controller.
SEE MORE:
Procedure After Airbag Triggering As Result Of An Accident
Check and/or replace following components after airbag triggering:
Satellites (control unit + sensor)
Components
Satellite, A-/B-pillar, left/right
Satellite, front door
Satellite, rear seat
Satellite, driver's/front passenger seat
Satellite, vehicle center
Procedure
Read out faul
Removing And Installing/Replacing Both Left Solenoid Valves
(N62/N62TU)
(cylinder bank 5 to 8)
Necessary preliminary tasks:
Read out fault memory of control unit of Digital Motor Electronics (DME)
Switch off ignition
Remove design cover, if equipped.
Unlock hose on tank venting valve and disconnect.
NOTE: Solenoid valve (1) controls adjustment unit on inlet side.
© 2019-2026 Copyright www.bmwx5info.com
