BMW X5: Principle - BMW Intelligent Personal
Assistant
Principle
The BMW Intelligent Personal Assistant is a personal
assistant that enables natural voice operation
of various vehicle functions. The Personal
Assistant simplifies the operation of the vehicle
with the automation of processes and habits.
General information
- BMW Intelligent Personal Assistant is available
depending on the national-market version.
- The system includes special microphones on
the driver side and the front passenger side.
- Say commands at a normal volume. Speaking
directly into the microphone does not improve
the speech recognition.
- Say the commands and numbers fluently as
well as with normal volume, emphasis, and
speed.
- ›...‹ identifies commands that can be spoken.
Functional requirements
Enter the following settings to access the full
range of functions:
- "Online speech processing" is activated.
- All settings under "BMW ConnectedDrive"
activated.
- Activation word is activated.
- The Driver profile is activated.
- "Synchronize driver profile" under
"Personalization" is activated.
- Relevant ConnectedDrive Services purchased
from the ConnectedDrive Store.
READ NEXT:
Activating the voice control
system
General information
There are various methods for activating the
voice control feature:
Press the button on the steering
wheel.
The microphone on the driver's s
Possible commands
General information
Most contents on the Control Display can be
spoken as commands, e.g. menu items or list entries.
Say list entries as shown.
Instructions can be issued or questi
Settings
Setting the voice control
You can set the system to use standard dialog or
a short version.
The short version of the voice control plays back
short messages in abbreviated form.
1. "CAR".
2
SEE MORE:
REMOVING AND INSTALLING/REPLACING ALL PISTONS (N52K)
Special tools required:
00 9 120 TORQUE ANGLE MEASURING DIAL
11 4 491
11 4 492
11 4 493
11 4 494
11 6 241
11 6 261
11 8 330
WARNING: Danger of injury!
Carry out work on piston pin circlip wearing protective goggles only.
IMPORTANT: If pi
Necessary preliminary tasks:
Remove fresh-air grille in rear cabin.
Remove trim from rear cabin monitor base at front.
Release screws (1) and remove rear cabin monitor with holder (2).
Disconnect associated plug connections and feed out leads.
Tightening torque.
Fig. 39: Identifying Rear Ca