BMW X5: Rear Seat, Through-Loading
BMW X5 (G05) 2019-2026 Service & Repair Manual / Seats / Rear Seat, Through-Loading
- Overview
- Removing And Installing Backrest Lock Adapter Plate
- Removing And Installing Outer Fold Adapter
- Removing And Installing/Replacing Ski Bag On Rear Seat (Through-Loading System)
- Replacing Cover On Backrest Side Section
- Removing And Installing/Replacing Backrest Frame For Left Rear Seat (Through - Loading System)
- Replacing Seat Cover For Left & Right Rear
- Replacing Backrest Cover For Left Rear Seat
- Replacing Backrest Cover For Rear Seat (Through-Loading System) On Right
READ NEXT:
Overview
OVERVIEW OF MICROSWITCHES
LOCK microswitches, inner, on seat frame on left and right.
FOLD microswitch on backrest frame, outer.
CF microswitch on seat frame, outer.
OVERVIEW OF TRIMS, REAR SEA
Removing And Installing Backrest Lock Adapter Plate
Necessary preliminary tasks:
Remove luggage compartment wheel arch trim on left or right.
Release screw.
Tightening torque 52 26 06AZ.
Remove adapter plate for backrest lock (1).
Fig. 144: Ident
Removing And Installing Outer Fold Adapter
Necessary preliminary tasks:
Remove outer fold trim.
Remove rear panel trim.
Partially remove seat cover with padding.
Release screw.
Release screw (1).
Unclip trim (2) at top.
Carefully tig
SEE MORE:
Intake Manifold
REMOVING AND INSTALLING INTAKE AIR MANIFOLD (N62)
Remove acoustic cover. To remove, unfasten screws. Raise acoustic cover and
remove towards front.
Remove design cover, if equipped.
Remove center of bulkhead.
Remove intake hose.
Remove injection pipe.
On rear side of manifold, unlock and disco
Checking And If Necessary Correcting Oil Cooler Line (N52K)
IMPORTANT: Danger of scalding! Only perform this work after engine has
cooled down.
Necessary preliminary tasks:
Remove underbody protection.
Recycling
Transmission fluid emerges when oil lines are detached from heat exchanger.
Catch and dispose of escaping transmission fluid.
Observe country-
© 2019-2026 Copyright www.bmwx5info.com
