The DISplus/GT-1 are helpful in pinpointing the cause of an engine misfire.
Once the short test is completed,
the fault memory of the ECM can be read out to determine which cylinder or
cylinders have set misfire faults.
There may or may not be any faults present. The engine could be running rough
Principle
The system can be used to set a speed limit, for
instance to prevent the vehicle from exceeding
speed limits.
General information
The system can limit the speed, starting at a
value of 20 mph/30 km/h. The vehicle can be
driven at any speed below the set speed limit.
Overview
Buttons on the