BMW X5: General information
Media at a glance
You can use various media formats to call up the content in the Owner's Manual. The following Owner's Manual media formats are available:
- Printed Owner's Manual.
- Integrated Owner's Manual in the vehicle.
Validity of the Owner's Manual
Production of the vehicle
At the time of production at the plant, the printed Owner's Manual is the most current resource.
Due to updates after the editorial deadline, differences may exist between the printed Owner's Manual and the Integrated Owner's Manual in the vehicle.
Notes on updates can be found in the appendix of the printed Owner's Manual for the vehicle.
After a software update in the vehicle
After a vehicle software update, such as via Remote Software Upgrade, the Integrated Owner's Manual for the vehicle will contain the latest information.
Printed Owner's Manual
Concept
The printed Owner's Manual describes all standard, country-specific, and optional features offered with the series.
General information
The Owner's Manual for Navigation, Entertainment, and Communication can be obtained as a printed book from the service center.
Supplementary Owner's Manuals
Also follow the Supplementary Owner's Manuals, which are included in addition to the onboard literature.
READ NEXT:
Integrated Owner's Manual
in the vehicle
Principle
The Integrated Owner's Manual specifically describes
features and functions found in the vehicle.
The Integrated Owner's Manual can be displayed
on the Control Display.
Selecting the Owner'
SEE MORE:
Removing And Installing/Replacing Backrest Frame For Left Rear Seat (Through -
Loading System)
Necessary preliminary tasks:
Remove backrest cover.
Remove retractor mechanism.
Remove lock.
Release screws (1).
Installation:
Replace screws and insert with Loctite.
Tightening torque 52 26 07AZ.
Remove lock for centre armrest.
Fig. 160: Identifying Screw
REMOVING AND INSTALLING/REPLACING
Centre Console Assembly
REPLACING CENTRE MOUNT GAITER
Necessary prelim2222inary tasks:
Remove propeller shaft.
NOTE: The propeller shaft is balanced. The front and rear propeller
shafts must be
reassembled in the same position.
Detach gaiter (1) from groove (2).
Mark front propeller shaft (3) and rear propeller shaft (
