BMW X5: Removing And Installing/Replacing All Trims On Left Or Right Seat Rails
Operation is identical to:
Removing all trims on left or right seat rail.
REMOVING AND INSTALLING/REPLACING GUIDE FOR FRONT LEFT OR RIGHT HEAD RESTRAINT
Operation is identical to:
- Removing guide for front head restraint.
REPLACING PADDING FOR FRONT SEAT THIGH SUPPORT
Release screws (1).
Installation:
Insert screws (1) with Loctite.
.png)
Fig. 56: Identifying Screws
Unhook seat cover (1) from marked area.
Remove carrier (2) for thigh support.
.png)
Fig. 57: Identifying Seat Cover Carrier
For seat heating optional extra only: Carefully detach felt (1) from thigh support.
Unfasten plug connection (2) and disconnect.
Installation:
Ensure correct cable routing.
Remove padding from cover.
.png)
Fig. 58: Identifying Plug Connection
REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT
Operation is identical to:
Replacing left or right front seat (normal/electric).
REMOVING AND INSTALLING/REPLACING BOTH SEAT RAILS ON LEFT OR RIGHT FRONT SEAT
Operation is identical to:
Replacing both seat rails on left or right front seat (normal/electric).
REMOVING AND INSTALLING/REPLACING SEAT FRAME ON LEFT OR RIGHT FRONT SEAT
Operation is identical to:
Replacing seat frame on left or right front seat (normal/electric).
REMOVING AND INSTALLING/REPLACING ADJUSTING UNIT FOR THIGH SUPPORT ON LEFT OR RIGHT FRONT SEAT
Necessary preliminary tasks:
- Remove front seat.
Move thigh support forwards as far as possible.
Unfasten plug connection (1) and disconnect.
Release screws (2).
Installation:
Insert screws (2) with Loctite.
.png)
Fig. 59: Identifying Plug Connection And Screws
Release screws in areas (1).
Feed out adjusting unit (2) complete with drive in direction of arrow and remove.
.png)
Fig. 60: Identifying Adjusting Unit Screw
REMOVING AND INSTALLING/REPLACING BACKREST FRAME ON LEFT OR RIGHT FRONT SEAT
Operation is identical to:
Replacing backrest frame on front seat (comfort).
REMOVING AND INSTALLING/REPLACING OUTER COVER ON LEFT OR RIGHT FRONT SEAT
Operation is identical to:
- Removing and installing/replacing outer cover on left or right front seat.
REMOVING AND INSTALLING INNER COVER ON LEFT OR RIGHT FRONT SEAT
Operation is identical to:
Replacing inner cover on left or right front seat (normal/electric).
REPLACING LUMBAR CUSHION ON FRONT LEFT OR RIGHT SEAT
Operation is identical to:
Replacing lumbar cushion on front left or right seat (normal/electric).
REMOVING AND INSTALLING/REPLACING VALVE HOUSING FOR LEFT OR RIGHT FRONT LUMBAR SUPPORT
Operation is identical to:
Replacing valve housing for left or right front lumbar support (normal/electric)
READ NEXT:
Removing And Installing/Replacing Thigh Support Holder On Front Left Or
Right Seat (Sports/Electric)
Necessary preliminary tasks:
Move thigh support forwards fully
Unfasten plug connection (1) and disconnect.
Release screws (2).
Installation:
Insert screws (2) with Loctite.
Fig. 61: Identifying
Replacing Backrest Cover For Left Or Right Front Seat
Special tools required:
00 9 317.
52 0 050.
Necessary preliminary tasks:
Remove front seat.
Remove rear panel on front seat backrest.
Detach plug connection (1) by twisting from backrest fram
SEE MORE:
Removing And Installing/Replacing Dynamic Drive Valve Block
Special tools required:
13 5 020
37 1 151
37 1 152
WARNING: Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
IMPORTANT: Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic
system.
NOTE:
Replacing Front Crankshaft Radial Seal (N52K)
Special tools required:
11 9 221
11 9 222
11 9 223
11 9 224
11 9 231
11 9 232
11 9 233
Necessary preliminary tasks:
Remove vibration damper
IMPORTANT: Do not release central bolt.
If the central bolt is released, the sprocket wheels of the timing chain and the
oil pump will no longer be
