BMW X5: Front Seat, Sports, Electrical
BMW X5 (G05) 2019-2026 Service & Repair Manual / Seats / Front Seat, Sports, Electrical
- Removing And Installing/Replacing All Trims On Left Or Right Seat Rails
- Removing And Installing/Replacing Thigh Support Holder On Front Left Or Right Seat (Sports/Electric)
- Replacing Backrest Cover For Left Or Right Front Seat
READ NEXT:
Removing And Installing/Replacing All Trims On Left Or Right Seat Rails
Operation is identical to:
Removing all trims on left or right seat rail.
REMOVING AND INSTALLING/REPLACING GUIDE FOR FRONT LEFT OR RIGHT
HEAD RESTRAINT
Operation is identical to:
Removing guide for
Removing And Installing/Replacing Thigh Support Holder On Front Left Or
Right Seat (Sports/Electric)
Necessary preliminary tasks:
Move thigh support forwards fully
Unfasten plug connection (1) and disconnect.
Release screws (2).
Installation:
Insert screws (2) with Loctite.
Fig. 61: Identifying
Replacing Backrest Cover For Left Or Right Front Seat
Special tools required:
00 9 317.
52 0 050.
Necessary preliminary tasks:
Remove front seat.
Remove rear panel on front seat backrest.
Detach plug connection (1) by twisting from backrest fram
SEE MORE:
Replacing Cover For Longitudinal Member With Left Door Pillar
(Partial Replacement B - Pillar)
Read contents of Body, General.
Spot-weld bonding is used on this vehicle. Observe specific procedure.
Remove or cover those vehicle components in the repair area which are
susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Fo
Gaskets And Seals
Head Gasket
The head gasket design on the N54 is unique to that engine.
It features a multi-layer steel design. There is no silicone rubber perimeter
"shelf" as on the N52. This is not
needed due to the aluminum block on the N54.
The N52KP and N51 engines are still using the head gasket that is f
© 2019-2026 Copyright www.bmwx5info.com
