BMW X5 Owners & Service Manuals

BMW X5: xOffroad package

Principle

The xOffroad package supports the driver when driving away from unpaved roads or with reduced traction. The system offers four different xOffroad driving modes for selection.

xOffroad driving modes and levels

The xOffroad driving modes can be selected based on the ground conditions.

When an xOffroad driving mode is switched on, individual systems in the vehicle are set to the best possible traction and driving stability.

With the two-axle ride level control, the vehicle level is set for the corresponding xOffroad driving mode.

Driving comfort

General information

The system optimizes handling and the traction on unpaved surfaces within the physical limits.

It is operated with the button and rocker switch in the center console.

Observe the information in the chapter Driving tips for driving on poor roads.

Additional information: Driving on poor roads.

Overview

Button and rocker switch in the center console

Driving comfort

  1. Switch the xOffroad driving mode on/off.
  2. Set the xOffroad driving mode.

Turning on

Press button 1 or rocker switch 2 forward or pull back. The xOffroad driving mode "xGRAVEL" is switched on. The LED on the button lights up.

The driving mode is displayed in the instrument cluster.

The effective speed range is displayed in the speedometer with a line below the scale.

Setting the xOffroad driving mode

Driving comfort

Push the rocker switch forward or pull it back repeatedly until the desired xOffroad driving mode is displayed in the instrument cluster.

xOffroad driving modes in detail

All driving modes

When the xOffroad driving modes are switched on, the following vehicle settings will be applied:

"xGRAVEL"

This driving mode is active every time the xOffroad driving modes are switched on.

Setting for: "Optimized vehicle setting for easy terrain." When switching on, the following additional vehicle settings are carried out, for example:

"xSAND"

Setting for: "Optimized vehicle setting for heavy terrain with loose surface. For maximum traction, deactivate DSC." When switching on, the following additional vehicle settings are carried out, for example:

"xROCKS"

Setting for: "Optimized vehicle setting for heavy terrain with strong irregularities. For maximum traction, deactivate DSC." When switching on, the following additional vehicle settings are carried out, for example:

"xSNOW"

Setting for: "Optimized vehicle setting for assured handling on slippery road." When switching on, the following additional vehicle settings are carried out, for example:

Manual switching off

Press button 1. The LED on the button goes out.

The last driving mode that was set through the Driving Dynamics Control will be activated.

Display on the Control Display

Display xView display

1. "CAR"

2. "Driving information"

3. "xVIEW"

or

"xOFFROAD"

The following information is displayed:

With the xOffroad package, the following additional information can be displayed:

System limits

The xOffroad properties may be reduced at higher speeds where required.

READ NEXT:

 Adaptive chassis

Principle The adaptive suspension is an intelligent controllable suspension. The chassis reduces body movements with a sporty driving style or on an uneven road. General information The intelligent c

 Climate control

 Air quality, Automatic climate control

Air quality General information The air quality in the interior is improved by the following components: Emission tested passenger compartment. Interior filter. Air conditioning system to control

SEE MORE:

 Replacing Lower Vent Line

IMPORTANT: Risk of damage! Extreme cleanliness must be ensured in the connection area of the vent lines during removal and installation. Even the smallest of dirt particles can cause leakage in the air spring system Necessary preliminary tasks: Remove front right wheel arch cover (rear section).

 Intake Silencer

REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N52K) Necessary preliminary tasks: Switch off ignition Lever out expansion rivets (1). Press lock (2) and raise intake duct (3). Detach intake duct (3) from air filter housing and remove. Fig. 8: Identifying Expansion Rivets, Lock And Int

© 2019-2022 Copyright www.bmwx5info.com