BMW X5 Owners & Service Manuals

BMW X5: Notifications

Principle

The menu centrally displays all notifications arriving in the vehicle in form of a list.

General information

The following notifications can be displayed:

The number of notifications is additionally displayed in the status field.

Go to notifications

1. Tip the Controller up.

2. "Notifications".

3. Select desired notification.

Delete notifications

All notifications, except Check Control messages or messages from the vehicle manufacturer, can be deleted from the list.

Check Control messages or messages from the vehicle manufacturer are displayed as long as they are relevant.

1. Tip the Controller up.

2. "Notifications".

3. Select desired notifications.

4. Press the button.

5. Select the desired setting.

Settings

It is possible to set which notifications are permitted and which notifications will be displayed at the start of the trip and at the completion of the trip.

1. Tip the Controller up.

2. "Notifications".

3. Tilt the Controller to the right.

4. "Settings".

5. Select the desired setting.

Display, notifications

General information

The BMW Intelligent Personal Assistants allows the configuration of the range of messages that will be displayed. Depending on the situation, the desired condition can be activated.

General information

Activate/deactivate

1. Tip the Controller up.

2. "Notifications".

3. Tilt the Controller to the right.

4. "Notification display".

5. Select the desired setting.

READ NEXT:

 Personal settings

 Data protection

Data transmission Principle The vehicle offers different services, whose use requires a data transfer to BMW or a service provider. The data transmission can be deactivated for some services. General

 Principle - Driver profiles

Principle Driver profiles can be created to store personal vehicle settings. If the vehicle is used by multiple drivers, each driver can create his personal driver profile. When a driver profile is se

SEE MORE:

 Removing And Installing/Replacing Right Eccentric Shaft (N62 From 9/03 And N62TU)

(cylinder bank 1 to 4) Necessary preliminary tasks: Remove servomotor for right eccentric shaft. Remove ignition coils on cylinder bank 1 to 4. Remove spark plugs on cylinder bank 1 to 4. Remove right cylinder head cover. Remove right inlet and exhaust adjustment units. Remove right inlet

 Headlights

REMOVING AND INSTALLING/REPLACING LEFT HEADLIGHT Operation is described in: Removing and installing/replacing left headlight (adaptive headlight). REMOVING AND INSTALLING/REPLACING RIGHT HEADLIGHT Operation is described in: Removing and installing left headlight. REMOVING AND INSTALLING OR REPLACING

© 2019-2025 Copyright www.bmwx5info.com