BMW X5 Owners & Service Manuals

BMW X5: Principle - Driver profiles

Principle

Driver profiles can be created to store personal vehicle settings. If the vehicle is used by multiple drivers, each driver can create his personal driver profile. When a driver profile is selected, the vehicle will automatically apply the stored settings in the driver profile.

General information

Three personal driver profiles can be created.

In addition, a guest profile is available that can be selected by any driver. The guest profile is active when a personal driver profile has not been selected.

Changes to the vehicle settings are automatically stored in the active driver profile or in the guest profile.

The vehicle can already adjust to the driver when it is unlocked. For this purpose, the recognition via a vehicle key or a digital key must be assigned to a driver profile.

ConnectedDrive countries: The settings stored in the driver's profile can be synchronized with the personal BMW ConnectedDrive account. It is thereby possible to use these settings in other BMW vehicles as well.

Functional requirements

When a driver profile is created, switched or deleted, the vehicle must move at a maximum of walking speed.

Welcome screen

After the Control Display is switched on, the Welcome screen will be displayed.

The following actions can be carried out on the Welcome screen:

As soon as the engine is started or any button is pressed, the Welcome screen will be hidden.

Setup assistant

The setup assistant is offered in new vehicles for a limited period of time on the Welcome screen to configure the most important settings for the vehicle.

"Getting started" Select to start the set-up assistant.

The set-up assistant can be started via iDrive at any time.

1. "CAR".

2. "Settings".

3. "General settings".

4. "Getting started".

The driver is guided step by step through the following functions:

The selected settings are stored in the active driver's profile.

READ NEXT:

 Guest profile - Driver profiles

Guest profile The guest profile can be activated by any driver. Vehicle settings that are entered when the guest profile is active will be stored in the guest profile. In the following cases the gues

 Setting up a PIN - Driver profiles

Setting up a PIN A driver profile with recognition cannot be activated without vehicle key and without digital key. In this case, a PIN can be set up to activate the driver profile. Countries in whic

 Renaming a driver profile - Driver profiles

Renaming a driver profile Non-ConnectedDrive countries: 1. "CAR". 2. "Driver profiles". As an alternative for Steps 1 and 2, the profile image can be tapped in the top status bar. 3. Select driver

SEE MORE:

 Oil Pressure, Oil Tempe

REMOVING AND INSTALLING/REPLACING OIL PRESSURE SENSOR (N52, N52K, N51, N54, N53) Necessary preliminary tasks: Switch off ignition N52, N52K, N51, N53 only: Remove ignition coil cover. N54 only: Remove intake filter housing WARNING: Scalding hazard! Only perform this task on an engin

 Brief Description Of Components

The engine control system of the V8 engine is described for the E65. With the digital engine electronics (DME) on the N62TU, the following sensors supply signals to the DME control unit: 2 eccentric shafts The eccentric shaft sensor records the position of the eccentric shaft for the Valvetro

© 2019-2022 Copyright www.bmwx5info.com