BMW X5 Owners & Service Manuals

BMW X5: Electronic unlocking of the transmission lock - Steptronic transmission

BMW X5 (G05) 2019-2022 Owners Manual / Controls / Driving / Electronic unlocking of the transmission lock - Steptronic transmission

Electronic unlocking of the transmission lock

General information

Electronically unlock the transmission lock to maneuver vehicle from a hazardous area.

Before unlocking the transmission lock, set the parking brake to prevent the vehicle from rolling away.

In vehicles with Mild-Hybrid technology and corresponding vehicle battery, the action steps for unlocking the transmission vary.

Without Mild-Hybrid technology: engage selector lever position N

Unlocking is possible, if the starter can crank the engine.

1. Press and hold down brake pedal.

2. Press the Start/Stop button. The starter must audibly start. Hold the Start/Stop button pressed.

3. With your free hand, press the button on the selector lever, arrow 1, and press the selector lever into selector lever position N and hold, arrow N, until selector lever position N is displayed in the instrument cluster.

A Check Control message is displayed.

Driving

4. Release Start/Stop button and selector lever.

5. Release brake, as soon as the starter stops.

6. Maneuver the vehicle from the hazardous area and secure it against rolling away.

Additional information: Tow-starting/towing.

With Mild-Hybrid technology: engage selector lever position N

1. Press and hold down brake pedal.

2. Press and hold the Start/Stop button.

3. With your free hand, press the button on the selector lever, arrow 1, and press the selector lever into selector lever position N and hold, arrow N, until selector lever position N is displayed in the instrument cluster.

A Check Control message is displayed.

Driving

4. Release Start/Stop button and selector lever.

5. Release the brake.

6. Maneuver the vehicle from the danger area and secure it against moving on its own.

Additional information: Tow-starting/towing.

Launch Control

Principle

Launch Control enables optimum acceleration on roads with good traction under dry surrounding conditions.

General information

The use of Launch Control causes premature component wear since this function represents a very heavy load for the vehicle.

Do not use Launch Control during the break-in.

Do not steer the steering wheel when driving off with Launch Control.

Additional information: Breaking-in period.

Functional requirement

Launch Control is available when the engine is at operating temperature. The engine is at operating temperature after an uninterrupted trip of at least 6 miles/10 km.

Start with launch control

1. Turn on drive readiness.

2. Press the button.

TRACTION is displayed in the instrument cluster and the indicator light for DSC OFF lights up.

3. Engage selector lever position S.

4. With the left foot, forcefully press down on the brake.

5. Press and hold down the accelerator pedal beyond the resistance point at the full throttle position, kickdown.

A destination flag is displayed in the instrument cluster.

6. The starting engine speed adjusts. Wait briefly until the engine speed is constant.

Keep the accelerator pedal in this position.

7. Release the brake within 3 seconds after the destination flag illuminates.

The vehicle accelerates.

Upshifting occurs automatically as long as the destination flag is displayed and the accelerator pedal is not released.

Repeated use during a trip

After Launch Control has been used, the transmission must cool down for approx. 5 minutes before Launch Control can be used again.

Launch Control adjusts to the surrounding conditions, when used again.

After using Launch Control

To increase driving stability, activate DSC Dynamic Stability Control again as soon as possible.

System limits

An experienced driver may be able to achieve better acceleration values in DSC OFF mode.

READ NEXT:

 Displays

 Instrument cluster

Principle The instrument cluster is a variable display. When you change to a different program via Driving Dynamics Control, the displays in the instrument cluster adapt to the respective driving mod

 Assisted Driving View

Principle Depending on the equipment, information about the driver assistance systems is displayed in an animated surrounding area of the vehicle when driver assistance is active. General information

SEE MORE:

 Replacing Engine Carrier With Wheel Arch, Left

Read contents of Body, General. The steel-aluminum mixed construction is used on the vehicle. Observe specific procedure. Remove or cover those vehicle components in the repair area which are susceptible to heat or dust. Use only approved spot-welding apparatus for repairs. Place vehicle on st

 Removing And Installing/Replacing Left Intermediate Levers (N62 From 9/03 And N62TU)

Special tools required: 11 9 470 11 9 472 11 9 473 11 9 474 11 9 475 11 9 480 11 9 490 (cylinder bank 5 to 8) Removal of intermediate levers is described separately from installation. Necessary preliminary tasks: Remove servomotor for left eccentric shaft. Remove ignition coils on cylin

© 2019-2022 Copyright www.bmwx5info.com