BMW X5 Owners & Service Manuals

BMW X5: Valet parking mode

Principle

In the valet parking mode, the Control Display is disabled. The operation via iDrive is no longer possible.

E.g., this mode can be used when the vehicle is handed over for valet parking.

General information

In the valet parking mode, it is not possible to change vehicle settings via iDrive. Personal profiles cannot be changed. Personal data cannot be displayed.

Additionally, the following actions are carried out:

Functional requirements

Accessing the menu for the valet parking mode

Via the switch-off screen

After switching off drive-ready state the switchoff screen will be displayed. Select the entry for the valet parking mode on the switch-off screen.

Via the display bar at the upper edge of the Control Display

1. Tip the Controller up.

2. "Valet parking mode".

Via the vehicle settings

1. "CAR".

2. "Settings".

3. "General settings".

4. "Valet parking mode".

Activating the valet parking mode

General information

Before activating the valet parking mode, a PIN must be set up to be able to deactivate the valet parking mode at a future time.

The procedure for entering the PIN varies depending on the active driver profile.

Driver profile with PIN

A PIN has been stored for the active driver profile.

It is not necessary to enter another PIN.

"Activate now"

Driver profile without PIN

A PIN must be assigned to the driver profile.

1. "PIN".

2. Enter PIN.

3. "Activate now".

Guest profile

The guest profile is the active driver profile.

A PIN must be entered.

1. "PIN".

2. Enter PIN.

3. "Activate now".

This PIN can be used once to deactivate the valet parking mode for the active guest profile.

Deactivating valet parking mode

General information

The lock screen of the valet parking mode is displayed on the Control Display.

The deactivation of the valet parking mode depends on which driver profile is selected on the lock screen.

Driver profile with PIN

Regardless of which driver activated the valet parking mode, a driver can deactivate the valet parking mode by entering his/her PIN.

1. Select driver profile.

2. Enter the assigned PIN for the driver profile.

If you forgot the PIN, the valet parking mode must be deactivated by entering the assigned ConnectedDrive access data.

Driver profile without PIN

The valet parking mode was activated by another person. To deactivate the valet parking mode, a driver without a PIN has to enter the access data for his ConnectedDrive account.

1. Select driver profile.

2. Enter the ConnectedDrive access data assigned to the driver profile.

Guest profile

In the guest profile, the valet parking mode can only be deactivated if the valet parking mode was activated in the guest profile.

1. Select guest profile.

2. Enter the PIN that was specified during activation.

If the PIN has been forgotten, the valet parking mode must be deactivated via a personal driver profile.

READ NEXT:

 Settings

General information Depending on the vehicle equipment and country version, various settings for opening and closing are possible. These settings are stored for the driver profile currently used. Unl

 Alarm system

General information When the vehicle is locked, the vehicle alarm system reacts to the following changes: Opening a door, the hood, or the tailgate. Movements in the car's interior. Changes in the

 Power windows

General information The windows can be opened with the vehicle key from the outside as well as closed with Comfort Access. With Comfort Access: The windows can be closed from the outside via Comfort

SEE MORE:

 Interior Lights

OVERVIEW OF INTERIOR LIGHTS Fig. 33: Location Of Interior Lights Glovebox light Footwell light (footwell) Front ceiling light Mirror light Interior light Luggage compartment light Footwell light (on floor trim panel, rear) Footwell light (door) REMOVING AND INSTALLING/REPLACING LEFT OR RI

 Wheel Bearings

REPLACING DRIVE FLANGE ON LEFT/RIGHT REAR AXLE SHAFT Special tools required: 33 2 116 33 2 160 33 2 201 33 4 200 Remove rear wheel. IMPORTANT: Expand turning lock sufficiently to avoid damaging thread when releasing collar nut. Release collar nut (1), activate parking brake for this purpose.

© 2019-2024 Copyright www.bmwx5info.com