BMW X5 Owners & Service Manuals

BMW X5: Trip data

Principle

Values for the trip, such as the average consumption or trip kilometers, are displayed.

General information

The trip data can be displayed on the Control Display and in the instrument cluster.

The values can be displayed and reset depending on various intervals, such as after refueling.

Display on the Control Display

Overview

The following information is displayed depending on the equipment and the set interval and driving mode:

Displays

1. "CAR".

2. "Driving information".

3. "Trip data".

Consumption history

The average consumption is shown in the consumption history in form of a chart based on the distance traveled and the driving mode.

Display in the instrument cluster

Depending on the equipment, information about the route can be displayed as widget in the instrument cluster.

The following information is displayed:

Selecting and setting widgets in the instrument cluster.

Additional information: Widgets.

Adjusting the display of the trip data

The intervals for the display of the trip data in the instrument cluster and on the Control Display are adjustable.

1. "CAR".

2. "Driving information".

3. "Trip data".

4. "Data since".

5. Select the desired setting:

Resetting average values manually

The following interval can be reset manually at any time: "Individual ( )".

With the button on the turn signal lever:

1. Continue to press the button on the turn signal lever until the widget for the trip data is selected.

Displays

2. Press and hold the button on the turn signal lever.

Via iDrive:

1. "CAR".

2. "Driving information".

3. "Trip data".

4. "Data since".

5. "Reset individual".

The average values and counters are reset.

Once the average values and counters have been reset, the following interval is automatically set: "Individual ( )".

READ NEXT:

 Sport displays

Concept The Sport displays especially support a sporty driving style. Display on the Control Display Overview The following information is displayed: Boost pressure. Engine oil temperature. G-Mete

 Head-up Display

Principle The Head-up display projects important information in the driver's field of view, for instance the speed. The driver can get information without averting his or her eyes from the road. Gene

 Lights

SEE MORE:

 Replacing Radial Shaft Seal For Drive Flange (ATC 700)

Special tools required: 23 0 490 27 1 460 DRIFT IMPORTANT: After completing work, check gear oil level, see Replenishing /Changing Transfer Case Oil (ATC 700) and top up if necessary. Use only approved gear oil in this transfer box. Necessary preliminary tasks: Remove transfer box Drive a h

 Frame Alignment Control Dimensions, Body

Dimensions in mm. Measurement tolerances: < or = 1000 mm +- 1.5 mm > or = 1000 mm +- 2.5 mm The control points shown serve to check the body and the straightening attachment. The specified dimensions/measurements always refer to the centerpoint of the bore/screw. Underbody view 1 Fig.

© 2019-2025 Copyright www.bmwx5info.com