BMW X5 Owners & Service Manuals

BMW X5: Front Seat, Normal, Manual

READ NEXT:

 Removing And Installing/Replacing All Trims On Left Or Right Seat Rails

Operation is identical to: Replacing all trims on left or right seat rail (comfort). REMOVING AND INSTALLING/REPLACING GUIDE FOR FRONT LEFT OR RIGHT HEAD RESTRAINT Necessary preliminary tasks: Remov

 Removing And Installing/Replacing Outer Cover On Left Or Right Front Seat (Normal/Semi-Electric)

Pull lever forward to remove: If necessary, lever out lower locking point (1) from rear with a screwdriver. Release screw (2). If necessary, move seat fully forwards and upwards. Fig. 4: Releas

 Replacing Seat Cover For Left Or Right Front Seat (Normal/Semi-Electric)

Special tools required: 52 0 050. Necessary preliminary tasks: Remove front seat. Remove rear panel on front seat backrest. Remove inner cover on front seat. WARNING: US/CDN front passenger

SEE MORE:

 Parking lights, low beams and roadside parking lights

General information If the driver's door is opened when the drive-ready state is switched off, the exterior lighting is automatically switched off after a period of time. Parking lights General information The parking lights can only be switched on in the low speed range. Switching on Press the butt

 Valvetrain

The valvetrain on the N52 introduced in 2006, used 5 mm valve stems on both the intake and exhaust. To increase durability, the exhaust valve stems were increased to 6 mm from 6/06 production. All of the new NG6 engine have adopted the 6 mm valve stem for the exhaust, the intake stem remains at

© 2019-2026 Copyright www.bmwx5info.com