BMW X5: Cargo area
BMW X5 (G05) 2019-2026 Owners Manual / Controls / Cargo area
READ NEXT:
Loading
Safety information
Warning
High gross weight can overheat the tires, damage
them internally and cause a sudden tire
pressure loss. Driving characteristics may be
negatively impacted, reducing lane sta
Automatic sliding and anti-slip
rails
Principle
The system prevents slipping of the cargo in the
cargo area when the anti-slip tracks are extended
to the top.
General information
Observe information and notes on loading.
The anti-slip t
Enlarging the cargo area
Principle
The cargo area can be enlarged by folding down
the rear seat backrests.
General information
The rear seat backrest of the second seat row is
divided at a ratio of 40-20-40. The side rear sea
SEE MORE:
Stabilizer Bar
REMOVING AND INSTALLING/REPLACING FRONT STABILIZER
Necessary preliminary tasks:
Remove front wheels
Remove front underbody protection
Remove front right wheel arch cover (front section)
Remove radiator air duct
Remove right brake air duct with holder
Remove heat exchanger from front axle car
Removing And Installing/Replacing Both Left Solenoid Valves
(N62/N62TU)
(cylinder bank 5 to 8)
Necessary preliminary tasks:
Read out fault memory of control unit of Digital Motor Electronics (DME)
Switch off ignition
Remove design cover, if equipped.
Unlock hose on tank venting valve and disconnect.
NOTE: Solenoid valve (1) controls adjustment unit on inlet side.
© 2019-2026 Copyright www.bmwx5info.com
