BMW X5: Transfer Case
BMW X5 (G05) 2019-2026 Service & Repair Manual / Transfer Box / Transfer Case
- Removing And Installing Transfer Box ATC 700 (Automatic Transmission)
- Installing Replacement Transfer Box (ATC 700)
- Removing And Installing / Replacing Control Unit For Transfer Box (ATC 700)
READ NEXT:
Removing And Installing Transfer Box ATC 700 (Automatic
Transmission)
IMPORTANT: After replacement, the "Repair" service function must be
carried out with in the
BMW diagnosis system.
WARNING: Danger to life!
Mount securing fixture for vehicle on lifting platform. See
Installing Replacement Transfer Box (ATC 700)
IMPORTANT: Before and after replacement, execute the "Repair" service
function with the
BMW diagnosis system.
Recycling:
Catch and dispose of escaping transmission fluid. Observe country-specific
wa
Removing And Installing / Replacing Control Unit For Transfer Box (ATC
700)
IMPORTANT: Read and comply with notes on protection against
electrostatic damage (ESD
protection).
Replacement:
Before and after replacement, execute the "Repair" service function with
the BMW di
SEE MORE:
Removing And Installing/Replacing Carbon Canister
Necessary preliminary tasks:
Remove rear right wheel arch trim.
Unlock quick-release fasteners (1) and disconnect vent lines.
Release screws (2) and remove carbon canister (3).
Installation:
Tightening torque 16 13 1AZ.
Fig. 27: Identifying Quick-Release Fasteners, Screws And Carbon Canister
RE
KDS Chassis/Wheel Alignment Check With Load Up To Design Position
IMPORTANT: Carry out chassis/wheel alignment with DIN load only:
If the technical preconditions for alignment with ride height
input are not
in place
If, in spite of repairs having been carried out, the car's ride
height between
the left and right sides is still outside the tolerance
If th
© 2019-2026 Copyright www.bmwx5info.com
