BMW X5: Steering Gear With Ser
BMW X5 (G05) 2019-2026 Service & Repair Manual / Steering And Wheel Alignment / Steering Gear With Ser
- Information On Replacing Steering Gear After Accident Damage
- Removing And Installing/Replacing Power Steering Gear
READ NEXT:
Information On Replacing Steering Gear After Accident Damage
Facts:
In the event of accidents or driving conditions similar to accidents,
shocklike loads can cause different types of
damage to steering gears. When a steering gear is externally undamaged, it is
Removing And Installing/Replacing Power Steering Gear
WARNING: Danger to life!
Mount securing fixture for vehicle on lifting platform to prevent the
vehicle from slipping off or tilting down.
Secure engine in installation position to prevent it from fal
Steering Arms, Tie Rod
REPLACING LEFT OR RIGHT TIE ROD
Special tools required:
31 2 240
31 2 246
NOTE: If the tie rod end to tie rod screw/bolt connection is released,
it is necessary
after reinstallation to carry out
SEE MORE:
Removing And Installing/Sealing Right Cylinder Head Cover (N62/N62TU)
(cylinder bank 1 to 4)
Remove design cover, if equipped.
Unfasten acoustic cover screws. Raise acoustic cover and remove towards front.
Remove electronics box cover.
Remove electronics box seal.
These work steps are described in REPLACING CONTROL UNIT.
Remove ignition coil cover.
Remove intake
Removing And Installing/Replacing Mechanism For Floating Roofliner
Necessary preliminary tasks:
Remove glass slide/tilt sunroof.
Remove slider set for floating roofliner.
Remove rear crossmember.
Unclip end stops (1) on left and right from guide channel.
Fig. 22: Uncoupling End Stops
Unclip floating roofliner cover plate (1) from slider for front sun shield.
© 2019-2026 Copyright www.bmwx5info.com
