BMW X5 Owners & Service Manuals

BMW X5: Roof-mounted luggage rack

General information

Installation only possible with roof rack.

Roof racks are available as special accessories.

Safety information

Warning

When driving with a roof load, for instance with roof-mounted luggage rack, the vehicle's center of gravity is higher, which increases the risk of the vehicle tipping in critical driving situations.

There may be a risk of accident or risk of damage to property. Driving with roof load only with activated Dynamic Stability Control.

Mounting

Follow the installation instructions of the roof rack.

Be sure that adequate clearance is maintained for tilting and opening the glass sunroof.

Loading

Because roof-mounted luggage racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response.

Therefore, note the following when loading and driving:

Driving on racetracks

Warning

The vehicle is not designed for use in M Sport or motor sport type competition. There is a risk of accident. Do not use the vehicle for M Sport or motor sport type competitions.

Higher mechanical and thermal loads during racetrack operation lead to increased wear. Use of the vehicle in M Sport or motor sport type competition is an improper use of the vehicle and may affect your warranty coverage. Please consult the "New Vehicle Limited Warranty" Booklet for further information on warranty matters.

READ NEXT:

 Trailer towing

 General information

The permissible trailer loads, axle weights, drawbar node weights, and the permissible gross vehicle weight are specified in the technical data. The vehicle is equipped with an enhanced suspension sy

 Towing a trailer

General information If the trailer socket is occupied, some driver assistance systems are unavailable, or available to a limited extent. A Check Control message is displayed where applicable. When dr

SEE MORE:

 Oil Cooler

FLUSHING OIL COOLER WITH LINES (AUTOMATIC TRANSMISSION) Special tools required: 17 2 018 17 2 010 SET OF ADAPTERS 17 2 019 17 2 010 SET OF ADAPTERS NOTE: Carry out the work steps listed when: Fitting a new or replacement transmission Flushing can only be carried out with the automatic transmissi

 Removing And Installing Or Replacing Both Rear Brake Discs

Special tools required: 34 1 280. Necessary preliminary tasks: Remove wheels. Remove and clean brake pads. After completing work: Adjusting handbrake. Read and comply with notes on braking in new brake discs / brake pads. Check minimum brake disc thickness: Position special tool 34 1 2

© 2019-2025 Copyright www.bmwx5info.com