BMW X5: Engine compartment
BMW X5 (G05) 2019-2025 Owners Manual / Mobility / Engine compartment
READ NEXT:
Overview
Engines with 4 or 6 cylinders
Vehicle identification number
Filler neck for washer fluid
Jump-starting, negative battery terminal
Jump-starting, positive battery terminal
Oil filler neck
Coola
Hood
Safety information
Warning
Improperly executed work in the engine compartment
can damage vehicle components and
impair vehicle functions. There is a risk of an
accident and damage to property. Have wo
SEE MORE:
Removing And Installing/Replacing Outer Cover On Left Or Right Front Seat
(Normal/Semi-Electric)
Pull lever forward to remove:
If necessary, lever out lower locking point (1) from rear with a
screwdriver.
Release screw (2).
If necessary, move seat fully forwards and upwards.
Fig. 4: Releasing Screw And Locking Point
Remove trim:
Unclip at top edge
Unclip at rear towards top side
Pull
Piston With Ring And
REMOVING AND INSTALLING/REPLACING ALL PISTONS (N62TU)
Special tools required:
00 9 120
11 5 430
11 5 440
11 5 450
IMPORTANT: Re-install piston, conrod and bearing shells back in the
same position and in the same installation location.
Conrods and conrod bearing caps are denoted with the same
© 2019-2025 Copyright www.bmwx5info.com
